• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace Door Handles

Door handles are an essential part of the decor of your home. A new handle will bring your home's decor and interior up to date.

Over time the knobs on your door may become stiff, or even break. These are signs that it's time to replace the knobs. This guide will help you select the right door handle replacement for your home.

Door Knobs

The handles on your doors will improve the appearance of your home and make it easier for you to shut and open them. They are available in a variety of colors, finishes, and styles to match your decor. If yours is beginning begin to show signs of wear or just need an upgrade, replacing them is relatively simple and can be completed in just a few steps.

The first thing to find is the spindle or shaft through which the knob is attached to the door. Some have a small hole that you can insert a narrow screwdriver into to remove the set screws holding the knob in place. Some have a slot or hole where you can use a flathead screwdriver to press on a spring-activated nut, known as a detent. This pin releases the latch mechanism and lets you to pull or push the knob.

After you have ahold of the spindle or shaft, take off the door knob and replace it with the new one. Align it correctly and check whether the latch works before tightening new set screws.

After replacing the knob, you can place the rod that is attached to the latch over the hole on the door. Lock it in place using the rod system on the second knob. Make sure that the holes are in alignment, then tighten the latch plate screws.

Some people prefer a smooth or brushed metal finish for their door hardware to give their home a modern and sleek style. This can be matched with their furniture. Others prefer a more rustic design that is a good match for farmhouse-styled spaces. If you have family members with mobility limitations You may be interested in an rim lock or a lever style door knob, which require less pressure to operate.

Other aspects are being considered more and more for the design of upvc door handle repairs handles. Infection control and accessibility have been key issues in the creation of new designs for handles. For example some handles can be operated using the arm of a person.

Latch

The latch that keeps your door handle open will wear out due to the wear and tear of use. Changing out the old latch to fit an entirely new handle can be a simple DIY job and it can make a big difference in the way your door handle repair near me - you can try this out, opens and closes.

Depending on the type of knob you have, the latch may be a part of the knob or it could be an independent piece that is attached to the door. In either case, the same process to remove and install will be used. It's simple to take off the old latch, especially if you have an entry handle that has a "magic" button. Located on the side of the knob, this little pressure-slot is what you need to press to pull the latch right out of the handle and out of the latching mechanism.

If your handle does not have this magical button, the first step is to remove any cover plates that are positioned over the latch plate. These are usually circular or rectangular and can be removed with the aid of a screwdriver. Some have slots where you can place your screwdriver, while others just snap off.

Then, unscrew the machine screws that secure the plate's inner and latch to the door handle. You will need to store the screws that are shorter and have sharp tips in a safe location to be able to reuse them later. Once the screws are removed you can remove the latch plate and mechanism out of the hole in the door and put it away.

You can now begin working on the new latch. Install the latch plate into the door lock handle repair hole and secure it with the hardware provided. Make sure that the square pin on the inside of the latch is facing the latching mechanism inside the handle and that it is lined up with the other screw chambers in the door handle. Then, push the outside latch plate onto the handle and secure it with the screws supplied.

Strike Plate

One of the most frequent reasons to replace the door handle is because it feels loose or doesn't lock properly. This is usually caused by incorrectly aligned parts of the latching mechanism, such as the strike plate being too small or has moved upwards or downward on the doorjamb over time. This project allows you replace your old strikeplate with a more substantial one, which can provide greater security for your door and will keep it closed.

Apply a lipstick or other marking material on the bolt that you are using to check if it is the strike plate. Close the door and attempt to latch it. If the mark is located below the strike plate hole, this indicates that your door won't latch due to the fact that the plate isn't long enough. If the mark is over the strike plate hole, it's likely that the strike plate has been moved up or down on the doorjamb.

Depending on the door depending on the door, you might be able to screw the new strike plate into the existing one with the screws that come with it. However, you might need to drill holes prior to drilling and then chisel out some of the wood to make sure it's a good fit. If this is the situation Be careful not to cut too much wood or you may ruin the strength of the doorjamb.

You can also try installing a new strike plate, which provides the lock with a stronger hold on the door and requires more force to open it. It usually requires two larger screws to secure the strike plate into the door frame. To accomplish this, you'll need to take off the existing strike plate and then drill and chisel the wood to create space for the new one.

This hard-to-find strike plate is specifically designed to work with antique rim locks, and it's made from durable solid brass in an extremely thick. This kit includes wood screws as well as machine screws, allowing you to choose the right hardware to suit your requirements. Be aware that wood screws have a pointed tip, whereas machine screws are blunter.