• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

You may need the key fob to be programmed by an automotive locksmith or Subaru dealer, based on how old your Subaru is. This is typically done by connecting a computer to the computer in the replacement car keys subaru.

To program your reprogram subaru key unlock the driver's side door using the door button, and then close it. You will hear a chime on the instrument panel and the dome lights will flash.

Step 1: Find the Transmitter Circuit Board

There are many ways to program your key fob. The first step is to know which kind of key fob you own. You can do this by studying the key fob's shape or by listening to your car's chime.

Once you have this information, you can begin the process of programming your key fob at home. To accomplish this, you'll need a metal key and a flathead screwdriver. Open the key fob case by twisting it. Push the metal key into the case. Then let go of the battery by pressing the tabs holding it in place. Replace the battery and put the case back together.

Step 2: Remove the key fob case

It is a good idea to change the battery of key fobs if they're not working. In some cases the buttons on the key fob could be damaged. If you notice that the button's metal contacts have been damaged, you can try applying solder back to them in order to make them function again.

Be sure to turn off your ignition and close your doors before you begin. Close the driver's door and press the button 10 times in rapid succession. Then you'll hear the instrument panel chime, and the dome light will flash. This means you're ready to move on.

Step 3: Insert the Key Fob in the ignition

Many articles on the internet will explain how to replace lost subaru key to program your new or replacement subaru key Subaru keyfob at home. However, many of them do not give very specific instructions. Reprogramming an electronic key is best done by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat with the doors shut and the engine off. The door button control should be opened and use it to unlock all doors. Close and open the door to the driver's side two more times. Inject and remove the ignition key (don't turn it) 10 times over 40 seconds. The system will chirp to confirm that the settings have been modified.

Step 4 Step 4: Turn on the ignition

It is important to know that this method of programming a key fob only is effective if you have a functioning key. If you don't, a dealership or auto-locksmith will be required to program the key for your Subaru Fort Bliss.

Once your key has been programmed, you should be able start your car in around five minutes. To begin, make sure all doors are closed and the engine is turned off. Then, sit in the driver's chair and unlock all doors with the door button control. Place the key in the ignition and turn it to its first position. The electrical systems will be activated, however the engine will remain off. Repeat this process 10 times.

Step 5: Unlock Driver's Door

Subaru offers many high-end automobiles equipped with key fobs that lock and unlock doors, turn on the engine, and even defrost windows. These devices are sometimes not functioning.

Call a locksmith dealer to fix the issue. This will fix the issue and ensure that your vehicle is secure.

To do this, you must open the driver's doors and close it. Put the key in the ignition and then turn it back to position 1. Then, turn it back to the off position. Repeat this ten times in the row as fast as possible. After the tenth repetition, you should hear an audible sound.

Step 6 Step 6: Press the Lock/Unlock button on the Driver's Door

If you need to replace the battery in a Subaru key fob, the process is easy. Remove the fob's exterior case. Then then, use the flathead screwdriver open the internal case and take out the old battery.

After removing the battery, replace it with a new one and close the case. Sit in the driver's seat and open all doors using the door button control. Put the key in the ignition and turn the key so that the electrical system is turned on, but the engine is off. Repeat this 10 times until you hear the chime from the instrument panel. This will put the system in programming mode.

Step 7 Step 7: Press the Lock/Unlock button on the Passenger's Door

For some owners, the annoyance sound heard when locking or unlocking the Subaru key fob from outside the vehicle could be distracting. In some instances, you can disable the chirp by opening and closing all doors while double-clicking lock button on your key fob.

Switch the ignition off and shut all the doors as well as the fuel-filler lid. For 10 seconds, press and hold the lock button on the key fob. After this is done, the instrument panel emits an audible chime. The chirp signalizes that the lid for the fuel-filler and door are locked. The setting can be changed to make the lids and doors are locked automatically, without pressing a request switch.

Step 8: Enter your 8-digit Transmitter Number

Write down the first sequence of 8-digits and keep it handy. Now, get in your driver's seat, shut all of the doors, and then turn the key to the first position (towards on). After 10 turns, your panel will chime once.

The circuit board for transmitters is located within the key fob case. The circuit board should have one or two numbers with 8 digits. Follow the directions in the guide to register the code. For older models, this process may require a visit to the dealer.