• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Electric Fireplace Wall Hanging Ideas

The wall-mount electric fireplaces can be put to go right from the box. They're an excellent way to add the ambience without venting or reworking.

However, they usually require careful installation because they're typically heavy. Follow these steps to install your new electric fire correctly.

1. Connect the Brackets

A wall-mounted electric fireplace or recessed fire instantly transforms any room. It's the perfect solution for homes without an existing fireplace opening or apartment residents.

Choose the location where you'd like to put your electric fire. It is important to choose the ideal location that isn't susceptible to moisture and is at least just a few inches from drapes, furniture, and other areas with a lot of traffic. Once you've found a spot to mark the wall, you can use layout marks for the top and bottom plates of the fireplace frame.

Make use of a tool like a drill to drill exploratory holes into the wall, checking for studs with a stud detector and marking the drywall the location of the fireplace mounting brackets. Then, you need to build out the wall or patch and paint the drywall to prepare it for fireplace installation.

Depending on the type of wall-mounted fire, you may either need to fit the screen and firebox as one unit or separate them using a wall bracket. If you're unsure about your capability to tackle this aspect of the project on your own, think about hiring an experienced general contractor or carpenter.

There is templates included with the majority of electric fireplaces. However you should keep a spirit level handy and pencil to mark the exact spot where the wall brackets will be placed. Before drilling, make use of the template to check that the power cable of the fireplace can be able to connect from the installation site to an outlet near by for a convenient plug in.

Install the drywall as clean and flush as you can to give the fireplace a sleek look. Add trim to the bottom edge and sand, paint and finish the frame.

Most wall-mounted contemporary electric fireplaces wall mount fires come with hooks or slots on the back of the unit that you insert into slots or hooks on the mounting brackets. Be sure to align the hooks or slots before connecting the brackets for your fire. Once the fire is in position you can then add additional elements, such as crystal embers or driftwood log pieces or decorative rocks.

2. Check the Bottom Bracket

The space above a fireplace mantel, chimney breast, or mantel is prime real estate to hang artwork. There is a delicate balance between an artistic arrangement and one that doesn't detract from the overall style of the fireplace.

Generally speaking, the rule of thumb is that a wall should be about 80% the length of the mantel or firebox it sits above. This will help it to be proportional and look aesthetically pleasing on the wall. Other decorative and ornamental items placed on the mantel may also influence this size & proportional guidelines.

If you're going to hang a photo above your fireplace, you must ensure that the frame is made from glass or other material that is able to withstand high temperatures. If you're not sure, a quick test with a cloth that is heat-sensitive will reveal whether the frame is suitable for this type of application.

A common concern with hanging pictures over the fireplace is the possibility of damage to artwork from smoke or heat that escapes. This is not a problem with a wood- or gas-powered fireplace. However should you decide to install an electric wall-mounted fire it is essential to follow the manufacturer's instructions.

The majority of electrical fires come with an installation bracket that can be attached to the wall with hanging screws or wall-mounted fixing systems. If the latter, it's recommended that you drill exploratory holes in an isolated area of the wall prior to you begin mounting your electric fire. Then you can use an instrument to locate cables and pipes to check that there aren't any cables or pipes within the vicinity of the position you've chosen for mounting.

If so, you could put your fire in the electrical socket or move it to a different location. If you decide to move it, you must make sure that the power cable will reach the electrical socket. This is crucial for older homes or those with walls that are solid. Otherwise the electric wall mounted fire place fire will not be able to function properly. Some models include an outline of where to drill holes, while others require a spirit level and pencil to mark the location on your wall.

3. Connect the Power Cord

If you've installed a recessed electric fireplace, you may have to relocate the plug socket from the wall to behind the fireplace. This will give you an elegant look. Check the fireplace first to make sure it is operating correctly.

A third popular way to install an electric fireplace is to frame the space and build it into the wall. This gives you a traditional, finished look and allows for the installation of a mantel. The owner's manual for your model will include details regarding framing, wiring and securing the fire.

If you're ready for mounting your new electric fireplace on the wall begin by marking the area of installation with a pencil or marker. Then apply a carpenter's level to ensure that the installation location is flat and level. You can use a studfinder to mark the location so you know you are drilling in a safe location.

Use your electric drill after you have marked the installation area to drill holes for bracket screws or hanging screws. Follow the steps in the owner's guide to this step. This is especially important if you're putting the fireplace best in wall electric fireplace drywall. If you're not sure how to do it you can consult an expert for assistance.

A cable organizer kit can be used to conceal power cords. These kits usually include sleeves, clips or boxes that can be used to bundle cables. You can also use wire snake tools to guide the cables through the wall. If you don't want to cut through your drywall, you can install a power bridge kit for more secure and cleaner connections.

You can also disguise the cords with paintable wire covers or by adhering them to the wall and skirting board. Make sure to keep the cover or tacks away from sources of heat. This will avoid accidental contact and will protect the cord.

4. Connect the adapter

A wall-mounted electric fireplace is a fantastic option for a home renovation or for those who don't have the space or funds to install a real gas fireplace. They are easy-to-hang and are ready to use right out of the box. They are an excellent alternative to those looking for an elegant, modern design or warmth from a fire. These units can be hung on any wall, just like art, and are electric with fan-powered heat.

Before you start the actual installation process it's recommended to gather all the tools and equipment you will need. Go through the user's manual for specific information on how to mount your electric fire. Some models will require you to fix the brackets directly to the wall, while others may have a mounting plate that slides into slots or hooks that attach to the brackets for mounting. It is important to remove all combustible material from the area where you will be installing a recessive unit. In general the materials should be kept 3 feet away from the front side of the fireplace and 1.5 feet away from its sides.

After you have checked all the parts after that, plug in your electric fire and make sure it is working. This is an important step since it will ensure that the flame effect screen and heater function according to the specifications. This will give you an idea of the final product's final configuration.

Cover the cord once you are confident that it's functioning properly. This will help keep the final product neat and neat. It is possible to achieve this by installing a new outlet with an outlet cord that can be placed behind the unit. This will provide an elegant finish to your fireplace.