• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps let your pet move around whenever they want, without you needing to let him in or out. They also prevent your cat from urinating inside the home.

Installing a cat flap into the door panel made of upvc is much easier than in glass doors, however it requires some knowledge and the right tools.

Take a look at the Door

Installing a cat flap on the door isn't easy however, as long as you select the right kind of cat flap make sure you take your time and follow the steps provided it should not prove to be too difficult. We will show you how to draw the shape using the jigsaw to cut the door's opening. Then, we'll finish the job by attaching the cat flap. This will ensure the flap remains in place and shields the doors from damage caused by rain and wind.

To determine the size of the cat flap in Upvc Door Panel flap that you need, measure your pet's width. This will ensure that the flap is big enough to allow your pet to enter and leave the house without having to open and close the door each time, yet small enough to prevent the pet from straying too far either way.

Once you have the measurements you can determine the location on the door where the template should be placed, usually this is done with an X. However, some kits include an illustration that outlines where to drill. If yours does then stick it to the door and draw a line around it. If your door has sill or moulding along the bottom edge of it ensure you have enough space as this will ensure your cat's safety and prevent them gaining access to your home.

Then put on your eye protection as well as a dust mask, and using a jigsaw begin to cut along the line that you penciled in, but don't press the blade too hard, as this can cause it to cut faster than you'd like it to. Use a set square to ensure that you are cutting the material in a proper manner and that the cut is a rectangle shape. When you are happy with the result, you are able to take the door material off.

Draw a Line

The cat flap is a great method to allow your pet to go in and out without having to worry about them being in the house with guests or leaving unwanted gifts in the house. It also stops draughts and helps to keep the temperature in your home steady. Fitting a cat flap to your door may seem daunting for those who haven't attempted it before. Many people call an expert joiner or carpenter to do the work. It is an option, but you can do it yourself if the tools are right and the steps are adhered to.

While this is far simpler with a wooden door, it is still possible in uPVC doors - although you need to be very cautious not to damage the doors since this could invalidate the warranty. The first step is to take measurements of the door, making sure that it will be able to accommodate the new cat flap. If you have an ordinary uPVC panel, this should be easy. However, if your door is composite or another type of door, you might have to be more cautious.

The next step is to determine the height of your belly for your cat flap fitters. This is the distance from the floor to the lower part of the cat's stomach, and you'll need locate a place in the door that will be within the range your pet can comfortably go through. Once you have the information you'll have to mark the area using a spirit level and a pencil, so that you are certain that the hole will fit your cat.

After you have marked the area, it is time to make the hole. It is important to be patient and use a jigsaw ensure the cuts are smooth and clean, not rough and uneven. This could cause damage to your door. Wear safety glasses and a dust mask while working with a jigsaw. Inhaling sawdust can be harmful for your health. Once you have completed the cutting process, you will have to smooth the edges of the hole with sandpaper so that your cat flap can be fitted easily in place.

Cut a Hole

It can be difficult to put an animal flap on the door panel or double glazing cat flap glazing unit. If you're not skilled in DIY, it's best to hire a professional to complete the work for you. A botched job may not only look ugly, but also an issue for security as well as allowing cold air to get in when the cat is outside and hot air to escape when inside.

The first thing you have to do is mark out the position of the hole in the door with a pencil and a spirit level. This will ensure that it is properly placed and runs parallel to other parts of the door. Make sure you have some sandpaper in your possession to smooth any rough edges.

After the line is marked you should cut out the hole using a jigsaw. Be sure to wear any safety equipment for working with the power tool. If you're worried about the noise, you can purchase an electric jigsaw that is quieter and easier.

You should only remove the material that is required to make the flap. It is necessary to leave a bit of material for the wall thickness of the cat flap. However cutting away too much could cause problems or even damage the frame of the door.

A door made of upvc may have a metal frame or panel within it that could interfere with the microchip cat flap and if this is the case, you'll need to make an oversize hole so that the metal doesn't get in contact with the the cat flap. If this is the case, it is essential to fill in the oversize gap and render it watertight.

If you're installing a cat flap into the frame of a double glazed window with a metal frame, you will need to speak to a specialist who can provide you with a brand new pane of glass with the hole for the cat flap inside. It is cheaper to do this than to attempt to fix a cat flap into an existing pane of glass that was not designed specifically for the purpose.

Place the Flap

Cat flaps give your pet the freedom to go and come whenever they like and let them relax in the house when they want to. If you have an uPVC front door, it might be hard to install the cat flap. This is particularly true if you do not own a glass panel that is cut. Luckily, if you're happy to buy and install a half-glazed replacement upvc door panel with cat flap panel, it's possible to add the cat flap to the doors. It's not as simple as simply making a hole in the door, however there are some things you'll need to take care of first to ensure it's secure.

A composite door panel is typically made up of a flimsy plastic outer skin joined to a soft insulating polystyrene core. It is crucial to be careful when cutting the material. This type of door usually comes with a template drawing which you can use as a guide for cutting the hole in your door.

After you have marked out the opening in your front door, it is time to put in the cat flap. You can purchase and install various models that range from simple push-button operated ones to ones that are activated by microchips that allow access only to your pet. No matter which type of cat flaps you choose it's essential that your cat is able to use the flap comfortably without getting stuck in bad weather.

A circular fitting is better than a square because circles can be cut more securely into glass. This is because square holes make the glass more susceptible to cracking when drills are used on it. This is also a safer choice because you won't need to drill into the toughened glass which could break and cause harm to your pet or family members. This is especially crucial if you have a child or an elderly person living at home who could be hurt by shards of glass.