• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Pellet Stove Furnace

Pellet stoves can be used as a second heat source or, if you have proper venting, as a primary heating option. They are available as freestanding models as well as fireplace inserts. They can give the appearance of a traditional wood-burning fireplace.

The auger moves pellets from the hopper into the combustion chamber, where they are ignited and generate heat. Sensors monitor the fire and can adjust its speed of operation to keep your desired room temperature.

1. Energy Efficiency

Pellet stoves burn a renewable, non-toxic fuel made of compressed sawdust wood chips, bark, and other materials that are typically dumped in landfills, but can be turned into an efficient and clean source of heating. They can help homeowners cut down on their energy use and therefore greenhouse gas emissions. Many users of pellet stoves best stoves say that they recoup their initial investment in only a couple of years, by reducing their heating bills.

Pellets are highly compressed and are more dense than natural wood, which makes them more efficient to burn. They also produce less creosote than traditional wood-burning fireplaces. Furthermore, they are packaged in plastic bags to stop moisture from entering and require less frequent cleaning.

Pellet stoves, as with other heating systems need to be sized and vented properly. A skilled technician can determine the venting requirements and space requirements in order to get the best results.

In the process of installation, the hearth is constructed to the right size, and the vent is installed through a hole that has been cut in the siding of your home. The vent can then be installed on a side wall or through the roof, depending on your preference and local regulations.

Once the vent and hearth are finished the pellet stove can be plugged in. Certain manufacturers provide remote controls that make starting and maintaining the fire easy and others include sensors that monitor airflow, combustion, flue temperature, and pressure. When the system detects it needs more pellets or less, it signals to the auger to speed up or slow it down in line with the needs.

All stoves have a storage tank that can hold between 35 and 130 pounds of pellets. Hopper capacities determine how often the stove will need to be filled with more hoppers, allowing longer intervals between refills. A grille draws fresh air from the room and then passes it over an exchanger that then blows heated air into the living area by convection. A grate or an auger distributes the pellets, while a pan underneath is used to collect any burned ones as well as the ashes of combustion.

Although pellet stoves modern stoves are more efficient than wood-burning stoves, they're not as efficient as natural gas furnaces or electric heaters. Electric components that drive motorized parts of the stoves require a power source. This could cause an issue in the event of a power outage, but backup systems such as generators and batteries are readily available.

2. Low Maintenance

Pellet stoves are incredibly efficient, but just like all major heating appliances, they require some care to ensure that they function properly. Cleaning the exhaust vent of your stove and the stove will help prevent the accumulation of harmful creosote that can cause an explosion, fire, or damage to your stove or house.

A pellet stove uses compressed natural particles (such as nutshells, kernels of corn or tiny pieces of scrapwood) made from wood or other materials. An electric auger will feed the pellets from a fuel container into the burner and into the combustion chamber. The rate at which the pellets are fed into the burner is controlled by the thermostat you set. This lets the fire remain roaring or modulate lower and even go out in accordance with the temperature you set. When the fire is gone the ash is thrown into an empty ash tin beneath the burner that can be easily removed and then disposed of.

Pellets are made from byproducts that would have been thrown away when processing lumber. They are a sustainable source and produce less particulates than traditional wood-burning stoves, making them a cleaner heating source. The amount of carbon monoxide, carcinogens, and other harmful chemicals emitted by pellet stoves is also much lower than those with modern wood stoves that are EPA-certified.

Due to the low emissions they produce, these stoves do not need to be vented through a chimney like traditional wood stoves, but they must be properly vented through a wall or another external structure. Pellet stoves have flue ports that open at the top or rear of the appliance and are connected to a vent pipe that extends outside of the home.

A pellet stove has one disadvantage that you must purchase or store enough fuel pellets for the entire winter time. Pellet stove owners typically consume three tons of wood pellets every winter, at a cost of $200 per ton. The costs can add up over the years, but it is cheaper than purchasing and hauling firewood to traditional fireplaces or stove. Make sure you buy enough pellets to ensure your stove will last through the coldest winter months, and that you have a suitable place to store them (preferably cool, dry and off the ground).

3. Reduce carbon footprint

Pellet stoves produce heat using renewable biomass fuel, reducing reliance on finite fossils fuels. This helps reduce the carbon footprint and helps diversify the sources of energy used in homes.

The emissions from pellet stoves are considerably less than woodstoves, even newer EPA-certified ones. The emissions of pellet stoves are also significantly lower than those of gas furnaces. Pellets are made from sawdust or bark, as well as other lumber fragments. They can also include soybeans, corn, or agricultural waste. When burned, they emit less particulates (leading to respiratory problems and allergies), carcinogens and carbon monoxide as well as nitrogen oxides.

The main difference between the wood stove and the pellet stove is the feed system. Pellet stoves come with hoppers that contain the pellets. When the thermostat or sensors suggest that the room needs heating, the auger turns. The pellets are then fed into the combustion chamber and burn to produce heat. The combustion chamber moves through a heat exchanger which transmits the heat to the blower and out into the room. This results in extremely low emissions and no creosote buildup.

After the hopper has been empty, the ash is removed by a cyclone, and it is then deposited into an ash container. The stove is fitted with a fan that circulates the warm, fresh air into the room. Most pellet stoves require minimal maintenance and have a large viewing area for you and your family to relax and enjoy the flames.

The main factor that influences emissions from stoves made of pellets is the quality of the pellets. Pellets that are not of the highest quality produce more emissions. When selecting your pellets, make sure they're certified to meet certain standards and do not contain other ingredients, such as petroleum-based or urea-based products. Find a business with a warranty and will repair or replace parts in the event of an issue. If you're looking to take the greener route, some states allow homeowners to claim a tax deduction for installing pellet stoves. This is a great way to offset the initial costs of this type of stove and make installation more affordable.

4. Reduced Noise

Pellet stoves emit very little smoke or exhaust when compared to fireplaces that burn wood. A fan is used to spread heat more evenly across the room. This feature is one reason why pellet stoves require less maintenance than wood stoves. While wood stoves require frequent cleaning of chemicals and particulates to prevent their deterioration stoves can be cleaned by a metal vacuum cleaner.

Many manufacturers have made a conscious effort to create stoves that will be easy to set up, operate and maintain. They also make their appliances with a variety of styles that will match your home's decor. Some come with a programmable thermostat and remote control as well as a WIFI apps that let you control and monitor your stove from anywhere in the world.

Most pellet stoves come with an enormous fuel hopper that can hold 35 to 130 pounds of pellets. The pellets are then pumped into the combustion chamber via an auger. The speed at which the pellets are delivered to the burner determines how hot the fire is and the heat output. The hopper can be filled with either hardwood pellets (from dense wood species like oak and hickory) or softwood pellets (from pine and fir). Some stoves will even use alternative biomass pellets, like those made from switchgrass or corn which are an eco-friendly option.

Since pellet stoves burn a clean fuel, they generate less smoke than conventional wood-burning fireplaces and require less maintenance. They don't require chimneys, making them an ideal choice for retrofits or new construction.

Pellet stoves don't require regular cleaning of creosote or other chemical like wood stoves. They only need periodic inspections to ensure proper operation and maintenance. Depending on the model, this may include a regular inspection and cleaning of the accumulated the ash or "clinker," as well as the fan and motor. Your appliance dealer can explain the proper procedure for your brand and model. He can also provide information regarding storage and safety, and help you find the appropriate fuel for your stove.